Review Shearwater Teric with Narked at 90 bungee mount and AMX Teknology aluminum screen protector

[DiveTucson]

As a note we have the covers for the Uwatec bottom timer as well so you can spruce that up.

Aladin 2G Aluminum Screen Protector for DIGIT 330 Devices

Discover the AMX Teknology DIGIT 330, an aluminum screen protector designed for the Aladin 2G, offering superior durability and precision fit for enhanced protection.

www.paragondivestore.com

 

[vsc]

Yes, See Teric and Perdix Cover.
I used a 2mm x 19mm silicon ring. Much nicer.

For future reference those in the US can use a Danco #30 o-ring if you can't find the 2mm x 19mm o-ring.

 

[tursiops]

For future reference those in the US can use a Danco #30 o-ring if you can't find the 2mm x 19mm o-ring.

The Danco #30 is a -018 o-ring.....pretty close to the 2x19mm.
Having used the 2x19 for a while, I think something a hair stronger would be good...that means a hair thicker.
I'd try an -116 or a 2.5x19mm.
cross-section ID
2x19 0.08" 0.75"
Danco #30 (-018) 0.07" 0.74"
-116 0.10" 0.74"
2.5x19 0.10" 0.75"

 

[Gone for diving]

I don't know about silicone orings, don't use them as much
But usually nitrile cracks in the sun,
and when stretched like that it seems worse...
How are the orings standing up for you guys?

 

[vsc]

The Danco #30 is a -018 o-ring.....pretty close to the 2x19mm.
Having used the 2x19 for a while, I think something a hair stronger would be good...that means a hair thicker.
I'd try an -116 or a 2.5x19mm.
cross-section ID
2x19 0.08" 0.75"
Danco #30 (-018) 0.07" 0.74"
-116 0.10" 0.74"
2.5x19 0.10" 0.75"

My AMX bezel protector shipped with a pair of 2.5x20mm o-rings.

I was targeting a cross-section which would fit between the computer and its band, where the larger 2.5mm OEM o-ring simply put wouldn't fit on both sides of the band causing the band to resist wrapping around the wrist.

That said are you having issues with the 2x19mm o-ring failing?

 

[Bigmatc]

Hi, does the AMX protector scratch the Teric’s bezel when it s removed? I plan to use the protector only when diving and remove it when I’m not…

 

[vsc]

Hi, does the AMX protector scratch the Teric’s bezel when it s removed? I plan to use the protector only when diving and remove it when I’m not…

Good question. I didn't wait to find out and lined the inside of the protector with strips cut from a roll of 3m polyurethane tape. While apparently the initial AMX protectors were a very tight fit, the one I purchased was rather loose. The 3m material fills the gap, point in fact.

Note the 3m material is identical to what Oceanic uses for their screen protectors.

 

[datth]

Turns out keeping the screen protector on with cave line tightened down is even better than these dumb O-rings that failed on my recent trip. Gonna keep this solution from now on. Though I use my Apple MagSafe Qi-compatible charger instead.