k954triniz
Contributor
i recent started diving the backplate and wing setup, 5 dives in. i am noticting corrosion/oxidation forming throughout the plate, especially around the screw holes and edges. when you rub your fingers on the edge its definitely rough. i disassemble the setup after every dive, except removed harness and place everything a big container of water for about 30 minutes then put everything to dry.
i know everything will corrode eventually but after dives and i think i do a pretty good post dive rinse.
you'd think a top dollar plate would have a little more expose protect.
i just dont want it to somehow start chafing into my wing.
considering taking it to work and cleaning off the oxidation and treating it with some stuff use on aircrafts.
then after possibly hydro dipping the plate.
what are some of yall thoughts and experiences with this plate.
i know everything will corrode eventually but after dives and i think i do a pretty good post dive rinse.
you'd think a top dollar plate would have a little more expose protect.
i just dont want it to somehow start chafing into my wing.
considering taking it to work and cleaning off the oxidation and treating it with some stuff use on aircrafts.
then after possibly hydro dipping the plate.
what are some of yall thoughts and experiences with this plate.