For Sale "Non splined G260 jam nut"

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

He wants 4, has offered to upfront for 10, which he will pay for, if there are problems moving any. I will go you halves on any other left overs. Mark my words, they will all sell.
 
He wants 4, has offered to upfront for 10, which he will pay for, if there are problems moving any. I will go you halves on any other left overs. Mark my words, they will all sell.
That is correct. I will pay you for 10 to make sure you have the numbers to get them made. I only need 4. If you can sell the other 6, great…refund the me difference. If they don’t sell, I will take them. No $$$ loss on your end.
 
@buddhasummer , do you think these work on my S600? 2x units please if they do.
 

Attachments

  • IMG_2923.jpg
    IMG_2923.jpg
    69.6 KB · Views: 52
@buddhasummer , do you think these work on my S600? 2x units please if they do.
The G260 nut installed on S600 does not look like a viable switch, to my non expert eye.

With standard S600 nuts (plastic Gen1 nut & metal Gen4 nut) there is approximately .38" length and 5 threads engaged on the LP hose, but only .24" with 3 threads engaged using the G260 nut.
 

Back
Top Bottom