25% off on any Carbon Monoxide device at Sensorcon

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

DandyDon

Colonoscopy Advocate
ScubaBoard Supporter
Messages
53,653
Reaction score
7,829
Location
One kilometer high on the Texas Central Plains
# of dives
500 - 999
Only applies to CO units, but heck of a discount. Shop at Sensorcon and use Promo Code JULY4 at checkout. That gets the Inspector down to $96.75 and free shipping.

The Inspector model and gallon ziplock bags is what I carry. It's not going to be completely accurate in the PPM (1/1,000,000) readings as you'll suck some air in when you fill, and then there is some drift over the 2 year life of the battery and sensor, but it'll get your approximate values. If you get a 10, REJECT! And if the alarm goes off while driving your car or sleeping in your room, GET OUT! And it really is as tough as they claim. Mine rode with my khaki trousers thru a complete wash cycle with bleach once. No problem.

It's time to send mine in for battery & sensor replacement required every two years. I add a dated tag to mine when it returns. I wish the sale worked on that.
 
It's time to send mine in for battery & sensor replacement required every two years. I add a dated tag to mine when it returns. I wish the sale worked on that.
How much does that cost? There's no price listed on their site, which is almost always a bad sign.
 
So, you just Chuck the sensor in a big, fill it from your tank, and look at what it says? How often do you have to calibrate it? I tried looking on the site, but it's not a huge fan of my phone...
 
How much does that cost? There's no price listed on their site, which is almost always a bad sign.
$49. It's under Support at the PURCHASE A CALIBRATION SERVICE link. I'm pretty sure that covers sensor & battery replacement, but I'm not sure. I tried to call, but they close at 4 pm Eastern. I'll call tomorrow. If it were much more, I'd just order a new one for $97.

I just checked the website, prices are there.
Which? They sell prices before discount are. Use the code on any CO unit.

So, you just Chuck the sensor in a big, fill it from your tank, and look at what it says? How often do you have to calibrate it? I tried looking on the site, but it's not a huge fan of my phone...
Bag, yes. I use gallon bags with handles on the zip for easy closing. Leave the unit on, crack the tank valve, bill the bag, close, and wait a few minutes. One time I put the bag on first, then crack the tank, and the bag with unit flew out of the boat into the water. Don't do that.
 
$49. It's under Support at the PURCHASE A CALIBRATION SERVICE link. I'm pretty sure that covers sensor & battery replacement, but I'm not sure. I tried to call, but they close at 4 pm Eastern. I'll call tomorrow. If it were much more, I'd just order a new one for $97.


Which? They sell prices before discount are. Use the code on any CO unit.


Bag, yes. I use gallon bags with handles on the zip for easy closing. Leave the unit on, crack the tank valve, bill the bag, close, and wait a few minutes. One time I put the bag on first, then crack the tank, and the bag with unit flew out of the boat into the water. Don't do that.
I suppose it's splashproof, so maybe it won't die in the water immediately!

If you do find out, I would like to know. I wonder if the $49 is just calibration. You'd think if it included the battery they would say so. An "out of warranty service" is $69, but it seems like that's the case/screen.
 
I suppose it's splashproof, so maybe it won't die in the water immediately!
As I mentioned...
Mine rode with my khaki trousers thru a complete wash cycle with bleach once. No problem.

If you do find out, I would like to know. I wonder if the $49 is just calibration. You'd think if it included the battery they would say so.
Yeah, it could be clearer. Someone remind me before noon tomorrow, or just call.
 
I phoned again. I get the usual recording but no one answeedr at Option 1. I suppose that they took off for the holiday without changing the recording thinking that everyone would know that they are closed for this Friday holiday. I returned mine for a new sensor & battery service in 2016 & 2018, but I can't remember for sure exactly how I arranged that. I'm sure that the price was well below the current sale price of $96.75, but I'd like a definite answer before proceeding. Yeah, their site could explain better.

The sale is good only for the weekend. Get one now if you don't have one.
 
Only applies to CO units, but heck of a discount. Shop at Sensorcon and use Promo Code JULY4 at checkout. That gets the Inspector down to $96.75 and free shipping.

The Inspector model and gallon ziplock bags is what I carry. It's not going to be completely accurate in the PPM (1/1,000,000) readings as you'll suck some air in when you fill, and then there is some drift over the 2 year life of the battery and sensor, but it'll get your approximate values. If you get a 10, REJECT! And if the alarm goes off while driving your car or sleeping in your room, GET OUT! And it really is as tough as they claim. Mine rode with my khaki trousers thru a complete wash cycle with bleach once. No problem.

It's time to send mine in for battery & sensor replacement required every two years. I add a dated tag to mine when it returns. I wish the sale worked on that.

Thanks for the link. This might be 1/2 of a good replacement for my Cootwo (great idea, OK execution, terrible customer service). I don't like the gallon bag idea, but I'm thinking of something like this:
O2+CO.png



The fittings are all off-the-shelf. The flow reduction inside the tubing fittings could be a simple as filling the fitting with hot-melt glue and then putting a pinhole through it.
 
How about the gallon bag with the kit that comes with an air sampler pump? Just used code to get one now.
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom