Valve leaking around DIN to Yoke Insert plug

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Considering that the US still doesn't use the metric systems...

Its not the standard for the country, but there is sure enough of it around. If I didn't have metric tools I'd be unemployable.


Bob
 
Then comes buying products that have their own proprietary fittings...that nothing Standard or Metric will fit...

I just think it's crappy manufacturing. I have both metric and imperial (hard to come by here and in UK) Allen Key sets in my dive box tool kit and I still find weird sizes I don't have a key for.

It's a bug bear of mine, why can't inserts just be a standard size. 8mm or 5/16 suits me fine.

@The Chairman - Last time I came across a seized insert (caused by over tightening not corrosion) my impact driver just rounded out the brass centre, so I had to fall back on old faithful - a hammer and chisel to beat it into submission. Fortunately only the once have I have an insert stuck that badly
 
@The Chairman - Last time I came across a seized insert (caused by over tightening not corrosion) my impact driver just rounded out the brass centre, so I had to fall back on old faithful - a hammer and chisel to beat it into submission. Fortunately only the once have I have an insert stuck that badly
Do you have a picture of that? If the right tool is properly sized, seated and used correctly, rounding the hex should be almost impossible. I can't imagine the brief torque generated by a hand impact driver to do that, but the vibrations cause the corrosion to crumble away. I have even gotten cracked inserts out using one. I did resort to putting one well encrusted valve in an ultrasonic cleaner loaded with fresh vinegar. It came apart, but part of the inner thread had disappeared in the process. The valve was removed from service.
 
Okay, I've ordered a pack of Viton 112 O-rings. Hopefully this should do the trick. Thank you all for your help!
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom