I have a 24'' Oxyhacker mixing stick made exactly like the manual depicts. It works great on my Alkin W31 (3.5 cfm), but I recently sold my W31 and bought a Mako 10 hp (13 cfm). The manual says to upscale the design for compressors larger than 8 cfm.
Does that mean longer pipe, larger diameter pipe, more baffles, larger air intake opening, larger diameter holes in the baffles, etc or all of the above?
I am currently just using a standard medical regulator. Will this still work or do I need to drill a large orifice.
I realize it depends somewhat on the compressor, but if I could get some advice on a baseline to start with, I would appreciate the help.
Scott
Does that mean longer pipe, larger diameter pipe, more baffles, larger air intake opening, larger diameter holes in the baffles, etc or all of the above?
I am currently just using a standard medical regulator. Will this still work or do I need to drill a large orifice.
I realize it depends somewhat on the compressor, but if I could get some advice on a baseline to start with, I would appreciate the help.
Scott