zip seals DUI, anyone glue new gloves on the inside instead of outside?

[cjmiller]

Have a set of wrist seals that I've pulled the old latex seals off and looking to make a set of dry gloves. Looking at Atlas 49 "vinylove"; if you put the zip on the outside of the glove, it fits quite well, and my 1-liter Yeti will stretch the glove and seal to the right diameter. I can trim up the extra length of glove when done, or just cram it into the sleeve.

Has anyone done this (attach to the inside, not the outside of a reused zip seal). Would have to use aquaseal etc. as contact cement wouldn't work; have to reposition a bit as the glove and zip seal base stretch together.

 

[marc.collin]

interested by the project... have you tested?

 

[cjmiller]

I ended up not doing this, just glued some generic latex wrist seals in place. I bought a set of used compressed neoprene dui gloves so the wrist seals are the spares.