XT2 Venturi dive/pre-dive switch doesn't move easily

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Ean86

Registered
Messages
57
Reaction score
13
Location
Wisconsin
I'm not sure what might cause this on my XT2 primary regulator but the venturi switch provides a lot of tension compared to my backup XT2 that hangs on my neck.

I've got only 10 dives on the set (since October 2017). A few pool dives and a quarry. The backup XT2 is smooth as can be. What might cause the first to be so sticky and is there anything I can do besides taking it in to have someone mess with it?
 
Seems to be more stiff the day after the dive. I'm assuming something got in there and maybe cleaned out any lube that maybe is applied when assembled? Again, is there anything I can to myself to have it move nice and smooth or is this just something that happens with time from diving?
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom