will apeks tx50 1st stage work with poseidon jetstream 2nd stage?
- Thread starter jagr
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
- Messages
- 17,535
- Reaction score
- 9,781
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
Providing the IP can be matched I see no reason why not.
ajduplessis
Contributor
Was not aware Apeks had xt50 first stage 
Are you sure about the first stage model??
Are you sure about the first stage model??Yes.
No problem at all putting a Jetstream on any 1st stage you like.
In fact a few years ago the Jetstream was sold mated to a Sherwood 1st stage and called the Sherwood Ultima and Dive Rite also had one on one of the generic Apeks copies.
The IP is not an issue.
One thing to note is you should use the proper hose that comes with the Jetstream.
No problem at all putting a Jetstream on any 1st stage you like.
In fact a few years ago the Jetstream was sold mated to a Sherwood 1st stage and called the Sherwood Ultima and Dive Rite also had one on one of the generic Apeks copies.
The IP is not an issue.
One thing to note is you should use the proper hose that comes with the Jetstream.
Last edited:
If using a metric hose you will need an adaptor to the 1st stage.
Similar threads
