What Regulators do you use.

[gsk3]

DR3000 with 5th port for backgas. They're great.

DR 2500 for deco. The T is way too big for a deco reg, amd it doesn't tuck properly under the hose as a result. Will likely replace with a DR O2 second stage, Hog, or just get an Apeks.

 

[CaveMD]

HOG D1 Cold's on side gas, stage bottles, deco bottles.

I have the exact same regulators for everything, you can buy the service kits just about anywhere and you can take a service class through TDI even if you don't work at a shop. They are solid regulators at a great price, with strong manufacturer support.

 

[skydawg]

Back Gas and Travel - Hog Piston 1st's and Hog 2nd's.
Deco - Hog D1's and 2nd's

Worked so far down to 220m, Was using D1 colds but they started free-flowing (even turned right down) at 180m

 

[RTee]

Zeagle Flathead VIs back gas
Hog D2 Cold water with HOG 2nd stage for stage bottles.

 

[Simon-]

Dive Rite

RG3500 (Hurricane) for back gas
RG3000 for stage/deco bottles

 

[diddydidit]

Backgas and sidemount Scubpro Mk25 + s600's
Deco Bottles, Dive Rite 2500 series.
Probably go to DR on my backgas as well

 

[RiverRat]

Backgas: Apeks ATX 200's. Rock solid, proven design and easy to rebuild and get parts.
70ft/50% - Coltri-Sub 1st stages (bought 2 on this board $60.00 each) with Apeks ATX/XTX 50's
100% - Scubapro MKII with R190 piston reg.

Pool/singles setup: Aeris ION I won here on Scubaboard Aeris regulator naming contest

 

[James R]

Probably go to DR on my backgas as well

I would trade you my DR backgas regs for your MK25/600s...they have the 5th port upgrade & are 02 clean with fresh service

 

[Slamfire]

I kick it old school. ScubaPro Mk10's and G250Graphites.

 

[Captain Brian]

Sherwood Maximus on backgas and deco bottles.