Unified Team Diving
Contributor
PRESS RELEASE: SEPTEMBER 06, 2011
UTD Equipment is proud to announce the new UTD Signature Series Vision Lighting System
the smallest and brightest underwater LED lighting.
The Narrow Beam Primary Dive Light

The Wide Beam Underwater Video Light
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
UTDs research and development team has spent the past year working closely with Vision X, one of the worlds premier LED lightingcompanies, to develop and test a new underwater lighting system. Vision X has developed lights for major mining companies, military applications, off-road vehicles, and NASA. Building upon that knowledge and robust technology, UTD and Vision X developed a full range of lighting including a series of primary and video lights that integrate into the UTD/DIR style of diving.
The Primary LED lighting system comes with either a single or double self-contained LED head with a 10-degree spot beam. The heads can be mounted either on a standard or soft handled Goodman style handle. All LED heads are installed with a wet-plug-able E/Ocord. This facilitates the LED Head(s) to be used with any battery canister with an E/O cord and an output voltage between 9V-50V.
The 60-degree wide-angle Video LED lighting system is modular use one head, or mount two, four, six, eight, or more heads to anUltra Light Arm or other arm system using standard ball adapters. UTDs 8.5 amp battery will drive four video heads for over two and a half hours.
UTD has a selection of battery canisters from 5 amp to 20 amp based on your individual needs. For the UTD Signature Series VisionLighting System, the preferred choice is the UTD Dual Voltage 8.5 Amp Battery Canister. This battery canister works perfectly for the Primary or Video LED Light heads, and the dual voltage switch also acts as a temperature controller for the UTD Solar heating panel. This is a real bonus when building your lighting and heating system.
UTD Equipment has packaged several Signature Series Vision Lighting Systems for both primary and video lights:
UTD Signature Series Vision Explorer Primary Light System
Designed for the explorer in you, this primary lighting system is a narrow-beam fixed-focus LED that is brighter than a 21 HID. The lamp has over 10 hours burn time and is lightweight, small, compact, and robust, making it easy to use in and out of the water and very easy for travel. It has a built-in E/O wet-plug-able cable that allows for easy interchangeability between video heads, heating system, or even switching to a backup LED head. It also allows for easy upgrade to the dual LED head system at a later date. It is impact resistant and will provide a lifetime of service. The total system consists of a single primary Vision LED light head with a spot beam, soft style Goodman handle, dual voltage 8.5 amp battery canister, and charger. It comes charged and ready to dive.
Features and Benefits
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
UTD Signature Series Vision Expedition Primary Light System
Designed for the diver who is looking for extensive light power for his/her expedition, this primary lighting system is a pair of narrow beamed fixed focus LED's that together are brighter than a 35 HID. The lamps have 5 hours burn-time, yet are small and compact enough to fit on a standard Goodman style handle. They have a built-in E/O wet-plug-able cable on each LED head that is connected to a Y-Splitter connector. This allows for easy interchangeability between a video system, heating system, or even a backup single LED head. The lamps are impact resistant and will provide a lifetime of service. The total system consists of a two primary vision LED light heads with spot beam, a standard Goodman handle, a dual voltage 8.5 amp battery canister and charger. It comes charged and ready for action.
Features and Benefits
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
UTD Signature Series Vision Video Light System
Designed for the videographer or photographer who is looking for a superior lighting system that provides a wide even coverage of 6000k light, this video lighting system consists of two (2) 60-degree wide beamed fixed focus LED's that are as bright as a 50 HID, have 5 hours of burn-time, yet are small and compact enough to fit on a point and shoot style camera without weighting it down. It has a built-in E/O wet-plugable cable on each LED head that is connected to a Y-Splitter connector, allowing for easy interchangeability between a primary LED head, heating system, or even to a dual LED primary system. The lamps are impact resistant and will provide a lifetime of service. The total system consists of a two video LED light heads mounted on standard ultra light arm balls, a dual voltage 8.5 amp battery canister, and charger. It comes charged and ready to shoot.
Features and Benefits
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
Primary LED Light Head
Features and Benefits
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
Video LED Light Head
Features and Benefits
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
Dual Voltage 8.5amp LiPo Battery Canister
Features and Benefits
8.5 amp Dual Voltage Li-Po Canister Specifications
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
UTD Equipment is proud to announce the new UTD Signature Series Vision Lighting System
the smallest and brightest underwater LED lighting.
The Narrow Beam Primary Dive Light

The Wide Beam Underwater Video Light
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
UTDs research and development team has spent the past year working closely with Vision X, one of the worlds premier LED lightingcompanies, to develop and test a new underwater lighting system. Vision X has developed lights for major mining companies, military applications, off-road vehicles, and NASA. Building upon that knowledge and robust technology, UTD and Vision X developed a full range of lighting including a series of primary and video lights that integrate into the UTD/DIR style of diving.
The Primary LED lighting system comes with either a single or double self-contained LED head with a 10-degree spot beam. The heads can be mounted either on a standard or soft handled Goodman style handle. All LED heads are installed with a wet-plug-able E/Ocord. This facilitates the LED Head(s) to be used with any battery canister with an E/O cord and an output voltage between 9V-50V.
The 60-degree wide-angle Video LED lighting system is modular use one head, or mount two, four, six, eight, or more heads to anUltra Light Arm or other arm system using standard ball adapters. UTDs 8.5 amp battery will drive four video heads for over two and a half hours.
UTD has a selection of battery canisters from 5 amp to 20 amp based on your individual needs. For the UTD Signature Series VisionLighting System, the preferred choice is the UTD Dual Voltage 8.5 Amp Battery Canister. This battery canister works perfectly for the Primary or Video LED Light heads, and the dual voltage switch also acts as a temperature controller for the UTD Solar heating panel. This is a real bonus when building your lighting and heating system.
UTD Equipment has packaged several Signature Series Vision Lighting Systems for both primary and video lights:
UTD Signature Series Vision Explorer Primary Light System
Designed for the explorer in you, this primary lighting system is a narrow-beam fixed-focus LED that is brighter than a 21 HID. The lamp has over 10 hours burn time and is lightweight, small, compact, and robust, making it easy to use in and out of the water and very easy for travel. It has a built-in E/O wet-plug-able cable that allows for easy interchangeability between video heads, heating system, or even switching to a backup LED head. It also allows for easy upgrade to the dual LED head system at a later date. It is impact resistant and will provide a lifetime of service. The total system consists of a single primary Vision LED light head with a spot beam, soft style Goodman handle, dual voltage 8.5 amp battery canister, and charger. It comes charged and ready to dive.
Features and Benefits
- Single 900 lum LED Head with a 10 degree narrow beam spot - brighter than a 21w HID
- Small and low profile LED head on soft handle Goodman
- Can be upgrade to standard Goodman handle
- LED head comfortably fits in dry suit pocket when shooting video or as a backup.
- LED head and Battery Canister equipped with wet-plug-able E/O cord for easy interchangeability to Video LED Head, a backup primary LED, heating systems, and/or a teammates light head or battery
- Sealed Dual Voltage 8.5 amp li-Po battery canister
- Provides 10 hours of burn-time for your LED light
- Small, compact and lightweight with minimum penetrations
- Charged through the E/O cord to reduce flooding risk
- Can be used with UTD Solar heating pad providing 4 hours of heat
- Light, handle, battery, and charger weighs 4.1lbs/1.85kg easy to travel with
- CE Marked and approved
- Lifetime warranty on workmanship / 90 days on E/O cord and cables
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
UTD Signature Series Vision Expedition Primary Light System
Designed for the diver who is looking for extensive light power for his/her expedition, this primary lighting system is a pair of narrow beamed fixed focus LED's that together are brighter than a 35 HID. The lamps have 5 hours burn-time, yet are small and compact enough to fit on a standard Goodman style handle. They have a built-in E/O wet-plug-able cable on each LED head that is connected to a Y-Splitter connector. This allows for easy interchangeability between a video system, heating system, or even a backup single LED head. The lamps are impact resistant and will provide a lifetime of service. The total system consists of a two primary vision LED light heads with spot beam, a standard Goodman handle, a dual voltage 8.5 amp battery canister and charger. It comes charged and ready for action.
Features and Benefits
- Dual 900 lum LED Heads with a 10 degree narrow beam spots brighter than a 35w HID
- Small and low profile LED Heads mounted on a standard handle Goodman
- LED heads and battery canister come with wet-plug-able E/O cord and Y-Splitter for easy interchangeability to Video LED Heads, a backup primary LED, heating systems, and even teammates light heads or batteries
- Sealed Dual Voltage 8.5 amp battery canister
- Provides over 5 hours of burn time when both heads are running
- Small, compact and lightweight with minimum penetrations
- Charged through the E/O cord to reduce flooding risk
- Can be used with UTD Solar heating pad providing 4 hours of heat
- 4.8lbs/2.15kg total weight including charger easy to travel with
- CE Marked and approved
- Lifetime warranty on workmanship / 90 days on E/O cord and cables
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
UTD Signature Series Vision Video Light System
Designed for the videographer or photographer who is looking for a superior lighting system that provides a wide even coverage of 6000k light, this video lighting system consists of two (2) 60-degree wide beamed fixed focus LED's that are as bright as a 50 HID, have 5 hours of burn-time, yet are small and compact enough to fit on a point and shoot style camera without weighting it down. It has a built-in E/O wet-plugable cable on each LED head that is connected to a Y-Splitter connector, allowing for easy interchangeability between a primary LED head, heating system, or even to a dual LED primary system. The lamps are impact resistant and will provide a lifetime of service. The total system consists of a two video LED light heads mounted on standard ultra light arm balls, a dual voltage 8.5 amp battery canister, and charger. It comes charged and ready to shoot.
Features and Benefits
- Dual 900 lum LED Heads with 60 degree wide angle beams, as bright as a 50w HID
- Small and low profile LED Heads mounted on a standard ultra light arm ball for easy attachment to any video/camera light arms or video/camera housing
- Wide angle, even coverage light at 6000k color temperature
- LED heads and battery canister come with wet-plug-able E/O cords and Y-Splitter for easy interchangeability to a backup primary LED, heating systems, and even teammates light heads or batteries
- Sealed Dual Voltage 8.5 amp battery canister
- Provides over 5 hours of light when both heads are running
- Small, compact and lightweight with minimum penetrations
- Charged through the E/O cord to reduce flooding risk
- Can be used with UTD Solar heating pad, providing 4 hours of heat
- 5.2lbs/2.45kg total weight including charger - easy to travel with
- CE Marked and Approved
- Lifetime warranty on workmanship / 90 days on E/O cord and cables
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
Primary LED Light Head
Features and Benefits
- Extremely robust, lightweight and small 900 Lum LED head.
- 3.25 x 2.44 x 2.05 / 0.50 lbs Complete with bulb and ballast
- 10 degree narrow spot fixed focus beam for easy communication and great for lighting your path
- Small size ensures easy in-water use, especially when mounted on divers hand in Goodman style
- Light weight, compact, and almost indestructible great for expeditions, diving adventures and travel
- Can be driven by any battery between 9 volts and 50 volts, drawing only 0.85 amps
- Easy mount kit available for mounting to helmets, scooter/dpv's, ROV's, etc.
- Bulb lifespan is 50,000+ hours - essentially unlimited
- Can be used on the surface and/or underwater to 600'/180m heat is not an issue out of the water
- Single LED Head Primary Light
- Can be mounted on a standard Goodman handle or on a soft strap Goodman handle
- Narrow beam, brighter than a 21 watt HID
- 10 hours of burn-time on the UTD Dual Voltage 8.5 amp battery canister
- Dual LED heads - Primary Light
- Mounted on a standard Goodman handle
- Brighter than a 35 watt HID with a narrow beam
- 5 hours burn-time on the UTD 8.5 amp battery canister.
- All heads come with a standard with a 18"/45cm E/O wet plug-able cord (pigtail), for easy swapping of batteries, light heads and interchangeability. Switch easily between heating, lighting, a Video LED head, a backup LED primary head and even your teammates battery
- Patented # D610,725 S / CE Certified
- Lifetime warranty on manufacturing and 90 days on cables and cords
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
Video LED Light Head
Features and Benefits
- Extremely robust, lightweight and small 900 Lum LED head.
- 3.25/8.2cm x 2.44/6.2cm x 2.05/5.2cm / 0.50 lbs/0.23 kgs - Complete with bulb and ballast
- 60 degree wide angle fixed focus Beam for even, smooth light, great for lighting your path
- LED has a 6000k color temperature for natural color and lighting (normal daylight color is 5600K)
- Small size ensures easy in-water use especially when mounted on video light arms
- Light weight, compact and almost indestructible, great for expeditions, diving adventures and travel
- Can be driven by any battery between 9 volts and 50 volts, drawing only 0.85 amps
- Easy mount kit available for mounting to video arms, divers, helmets, scooter/dpv's, ROV's and so on
- Bulb lifespan is 50,000+ hours - essentially unlimited
- Can be used on the surface and/or underwater to 600'/180m heat is not an issue out of the water
- Single LED Head Video Light
- Mounted on a single ultra light ball.
- Comes standard with a 18"/45cm E/O wet plug-able pig-tale
- As bright as the 50 watt HID head, with a wide beam
- 10 hours of burn-time on the UTD dual-voltage 8.5 amp battery canister.
- Dual LED heads - Video Lights
- Each head is mounted on an ultra light arm ball
- Comes standard with an 18"/45cm E/O wet plug-able pig-tale and a Y-Connector
- As bright than a dual 50 watt HID system
- 5 hours burn-time on the UTD 8.5 amp battery canister.
- All heads come standard with a 18"/45cm E/O wet plug-able cord (pigtail), for easy swapping of batteries, light heads and interchangeability. Switch easily between heating, lighting, a Primary LED head and even your teammates battery
- Patented # D610,725 S / CE Certified
- Lifetime warranty on manufacturing and 90 days on cables and cords
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]
Dual Voltage 8.5amp LiPo Battery Canister
Features and Benefits
- Dual voltage for easy temperature control on the UTD Solar Heating Pad - 16.0v or 11.2v
- Either voltage will power the Vision LED Light heads and the Solar Heating System
- Provides 10 hours of light on single LED head
- Provides 4 hours of heat at full power
- Comes standard with an easy to install hip mounting system
- E/O wet plug-able cord for easy exchange between primary and video LED's or heating systems will also power HID light heads if necessary
- Sealed Li-Po battery canister for more power from smaller canister and less weight.
- Sealed canister to reduce risk of user error and flooding. Charged through the E/O wet-plug-able cable
- Easy to reach magnetic switching on bottom of canister
- Max depth rated to 600'/180m
- CE Marked and Approved
- Lifetime warranty on workmanship / 90 days on E/O cord and cables
8.5 amp Dual Voltage Li-Po Canister Specifications
- A 8.5 Ah Li-Po battery providing 136 watt/hrs of power
- Completely sealed canister providing protection from water intrusion due to user interaction or cut cord
- No switch boot or other O-ring failure points charges through the E/O wet-plug-able cord
- Dry weight 3.2 lbs (1.45kg), in-water 1 lb (0.45 kg) negative
- Recharge time from complete discharge is 4 hours
- Universal input charger US input cord provided, UK and European input cord available
- Canister machined from solid aluminum marine grade powder-coat finish
- 5.75"(14.6 cm) Length, 3.25"(8.2 cm) Diameter
- Comes standard with a 32" (81.28cm) E/O Cord
For more information, images and video please visit UTD Equipment - +1 206 321-0870 [email]sales@utdequipment.com[/email]