Used Max Air 35 (5.5 HP gas)

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Status
Not open for further replies.

mwb1978

New
Messages
2
Reaction score
0
Location
Oswego, NY
# of dives
I just don't log dives
I bought this compressor about 5 years ago and used it about 10 times. As you can see in the pictures, it only has 19 hours on it. I last used it a few months ago to fill a friends tank, and it ran just fine. I just don't dive anymore.

Included is a new, sealed breathing air filter from Max Air, almost a gallon of the proper synthetic compressor oil and the owners manual. The only thing wrong with the unit is a small burn/nick on the fill whip where it flopped onto the hot exhaust once. I suppose a new whip wouldn't hurt, but I tested this one and it holds just fine to 4500 PSI. It's a regular SCUBA yoke fitting.

I'm unable to post a link for the specs, but you can go to the Max Air website or just Google search it.

Asking $2400, shipping included to anywhere in the U.S. No international shipping. If you happen to be near Oswego, NY 13126, face-to-face is welcome too.

Thanks,
Morgan
 

Attachments

  • 2010-08-15 13.30.56.jpg
    2010-08-15 13.30.56.jpg
    394.3 KB · Views: 169
  • 2010-08-15 13.32.12.jpg
    2010-08-15 13.32.12.jpg
    400.4 KB · Views: 139
  • 2010-08-15 13.32.40.jpg
    2010-08-15 13.32.40.jpg
    398 KB · Views: 137
  • 2010-08-15 13.32.57.jpg
    2010-08-15 13.32.57.jpg
    396.6 KB · Views: 145
I recently purchase a used compressor the same as this one and have it hooked up with a trimix blending stick and additional off board filtration. It works very well. They are light enough to be moved around by one person in a portable operation. It's meets the published filling specifications and is a great little compressor for a reasonable cost. The Honda engine seem very reliable and quite capable of powering the compressor to full output.

John
 
John,

Send me another PM with your address and I'll make a copy of the manual for you.
 
Status
Not open for further replies.
https://www.shearwater.com/products/peregrine/

Back
Top Bottom