Really? I do loose lips when I do an O2 flush at 20 feet to check for current limitation. If you just bite the mouthpiece wings and relax your mouth, it doesn't leak?
Maybe Pete is right about the rEvo...![]()
Correct. If I totally relax my mouth and try to exhale out of my mouth (while in horizontal-ish trim), my breath just goes through the loop. To vent, I have to go somewhat head up.
theoretically that may be correct but on dive of 8.5ata im hoping you'd stop for deco wouldnt that allow the cmf valve /solenoid to "catch up" to whatever set point you had
The CMF won't catch up. It only puts out enough to replace what you metabolize. So, other than descending, the CMF by itself is not going to cause the PO2 to go up. But, the solenoid should ensure it doesn't go hypoxic. Otherwise, a manual add of O2.
But, yeah, from 250, I imagine if you go straight to the surface with no stops, going hypoxic near the surface may not be your biggest concern. And in the example given, the mix would only go hypoxic at around 8' depth, I think? At 8' it would be ppO2 of 0.16?
So, even one burst of O2 into the loop somewhere along the way up (from 250) should be enough that the loop won't go hypoxic at all, right?
I think the primary risk is that you get shallow, vent too much from the loop and then the ADV fires. Depending on the location where the ADV injects gas into the loop, it might not mix with the other gas in the loop adequately before you breathe it and so then you could inhale a good breath or two of hypoxic gas. I think on the rEvo the location of all the gas injection (i.e. before the 1st scrubber) makes this unlikely. But, other CCRs have the ADV injecting just before the DSV or right into the inhale counterlung. Then it seems like it could be a problem if the dil is hypoxic.