Unknown Inflator valve

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

emoreira

Contributor
Messages
2,147
Reaction score
712
Location
ARGENTINA
# of dives
200 - 499
Hi I was given some old BCD parts and among them was this BCD valve.
I guess it should have been covered with rubber or plastic.
Can any one ID it. Thanks.
IMG_6113.JPG
 
It looks like an Aqualung / Seaquest type power inflator.

-Z
 
Found out. It's a Subacqua valve, but the external rubber cover is lost.
If anyone has the service manual or explosion diagram, much appreciatted.
 
Recommend replacing...new power inflator is approx $20 +/-.

-Z
 
Recommend replacing...new power inflator is approx $20 +/-.

-Z

Of course, but you do not live in South America. So, your recomendation could perhaps not fit here.
 
  • Like
Reactions: OTF
Of course, but you do not live in South America. So, your recomendation could perhaps not fit here.
Not just in SA but in many parts of SE Asia as well.
Can you see a way to open it?
 
Muy bien. Most impressed.
All you need is to replace the O-rings and apply some grease to the moving part.
 
It seems that the inflate and deflate button retainers are missing from your photo
 
It seems that the inflate and deflate button retainers are missing from your photo
IMG_7049.JPG


I had to modify the Deflation valve because it broke where it screws to the o-ring cap.

This is the same valve than the original photo, maybe a little older, but this has the rubber cover.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom