Suunto vyper air cannot sync to transmitter

[esbuff]

Vyper air cannot find transmitter after battery change in transmitter and watch. Anybody else had this problem. I have no idea how to sync these guys back up. I have tried everything. Please help

Scott

 

[Gcrackr]

I have had problems paring from time to time. My tips:
1. Section 5.7.2 & 5.8.11 in the manual refer to the subject of pairing
2. Make sure you have air in your tank--the transmitter will not turn itself on without air pressure.
3. Make sure "Tank Pressure" (Section 5.8.11) is ON, then clear the code
4. Immediately press M on your computer (i.e. go to dive mode)
5. When the suface display appears, immediately and SLOWLY turn on air in your tank (the key is SLOWLY) and hold the computer right next to the transmitter.

If the above does not work after a couple of tries, check your batteries: are they inserted properly (i.e. plus & minus end in the right spot)? Or try different batteries.

Hope this helps

 

[esbuff]

Tks I will give it a try again

 

[MRTdiver]

hold the computer right next to the transmitter

Yeah what he said.