Suunto Solution Nitrox - Metric to Imperial

[Jack Rosen]

Does anyone know how I can change this computer from reading in metric to imperial. It has ft marked on the right side so I figure it must be able to read in feet.

I have gone through the manual and I cant find it and I have went through whatever setting I could. Its probably something very simple but its got me stumped.

Thanks - Jack

 

[Streydog]

What Suunto? On mine hit the mode button until it reached the Time mode, then hold down the down button until general settings comes up, then scroll to units and that is where you can change it

Sorry didn't realize the model # was listed in your title. I found a manual for your computer but I do not understand their instructions

 

[tursiops]

I have this vague memory that the Solution NItrox was made either for Metric or Imperial, that the same unit won't do both.
Hope I'm wrong.

 

[Jack Rosen]

What Suunto? On mine hit the mode button until it reached the Time mode, then hold down the down button until general settings comes up, then scroll to units and that is where you can change it

Sorry didn't realize the model # was listed in your title. I found a manual for your computer but I do not understand their instructions

Thanks, I did look there but didnt see anything that said units but I will look again.

 

[Jack Rosen]

I have this vague memory that the Solution NItrox was made either for Metric or Imperial, that the same unit won't do both.
Hope I'm wrong.

I thought that might be the case but one thing didnt make sense to me. Here is a picture of one and why would they have feet on the left side if you cant change it.

 

[Jack Rosen]

What Suunto? On mine hit the mode button until it reached the Time mode, then hold down the down button until general settings comes up, then scroll to units and that is where you can change it

Sorry didn't realize the model # was listed in your title. I found a manual for your computer but I do not understand their instructions

Just checked again, there is no setting for "Units"