strange reflection from camera in picture

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Got mine yesterday. A bit tough to get lined up just right as the adhesive is very aggressive (sticky). Looks like it should work. I'll know this weekend :D
 
The black sharpie will take care of that. I used to do a lot of macro shots and with a dome port had some partial reflection from the lettering on the side of a filter (not even on the front of the lens). The solution was some flat black vinyl tape which was hard to find because most of it is glossy.

Good discussion and always use the moisture muncher when using a housing. Hopefully, you'll never need to open the housing while out on the boat, but if you do this is a must.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom