claymore
Contributor
My daughter bought a set of regs several years ago that need to be serviced and I'm wondering if they are worth servicing or if there are parts available.
The reg set seams to work as she was diving with it this summer down to about 30 feet and did not seem to have a problem.
The second stage has a black plastic body with a chrome ring that holds the black plastic front plate on and says WATERLUNG 200 SPORTWAYS on the purge button and the OCT appears to be the same second but has an orange face plate that says OCTOPUS 911 SPORTSWAYS.
The first stag is About 3 3/4" long 1 1/4" in diameter with the yoke connector coming off at 90 degrees from the main body on the same end as the HP port. The three low pressure ports come out on the opposite end of the HP. All the ports are located at the ends of the long axis of the reg. there are four holes evenly spaced around the circumference of the 1st stage about a inch from the LP ports.
Any information would be appreciated
The reg set seams to work as she was diving with it this summer down to about 30 feet and did not seem to have a problem.
The second stage has a black plastic body with a chrome ring that holds the black plastic front plate on and says WATERLUNG 200 SPORTWAYS on the purge button and the OCT appears to be the same second but has an orange face plate that says OCTOPUS 911 SPORTSWAYS.
The first stag is About 3 3/4" long 1 1/4" in diameter with the yoke connector coming off at 90 degrees from the main body on the same end as the HP port. The three low pressure ports come out on the opposite end of the HP. All the ports are located at the ends of the long axis of the reg. there are four holes evenly spaced around the circumference of the 1st stage about a inch from the LP ports.
Any information would be appreciated