SP MK10 SPEC boot. ScubaPro MK10 SPEC boot by Raftingtigger
SPEC boots
- Thread starter raftingtigger
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OP
Freshly printed boot.
![IMG_20191222_215728473[1].jpg](https://scubaboard.com/community/attachments/img_20191222_215728473-1-jpg.557091/ "IMG_20191222_215728473[1].jpg")
Finally!
Someone's going to help us bring back sealed Scubapro pistons! With an unsealable Mk25, no wonder Atomic is doing so well.
Hooray for @raftingtigger !
Someone's going to help us bring back sealed Scubapro pistons! With an unsealable Mk25, no wonder Atomic is doing so well.
Hooray for @raftingtigger !
OP
I have no idea. I just measured the groove on one of my MK-10s and created and printed. Put it on and it fit like a glove. Went on with about the same feeling and give as a real one. It would be incredibly easy to create one specifically for the MK 15/20. Just PM me the diameter in mm.x of the base of the groove, top of the groove and width of the groove.
Awesome! I’ll get some measurements and get back to you.
@raftingtigger , think you could add the links to those to this thread: A repository of 3D print STL sources
I have some things to update there too!
Respectfully
James
I have some things to update there too!
Respectfully
James
Similar threads
