Shorten T-3 factory swivel hoses.

[shucksun]

I have a T-3 setup, my first and both 2nd stages are T-3's. Where can I get the factory LP hose shortened? It bows out way to far for the low profile kelp diving setup I need in So California.

Thank you

 

[Scared Silly]

You have a couple of choices. Order a custom length hose from AA or cut it down. I am sure if you sent it to AA they could have it cut down and the reg side connection redone. I would get costs for doing both.

 

[shucksun]

You have a couple of choices. Order a custom length hose from AA or cut it down. I am sure if you sent it to AA they could have it cut down and the reg side connection redone. I would get costs for doing both.

My LDS says "AA will not shorten the hose". Do you have a contact at AA?

 

[tbone1004]

your LDS is right, they're not going to do it. Like we said in the other thread you started on the subject, your only chance of getting it shortened is to go to a hydraulics shop that will crimp a new end on for you, but Atomic won't touch it due to liability purposes