Service for HP Swivel

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

9.525mm
12.75mm
1.778mm

O-ring 9.52x1.78. This is a standard size.
O-ring -012 is 9.25x1.78 this might work as well but is less perfect than 9.52x1.78

I have a swifel as well which needs 9.52x1.78.

And don't forget: NBR90, not NBR70
I guess I would have never thought to look for an obviously imperial set of measurements in a list of metric o-rings, so thanks for that. I found it it one list of DIN sizes, but I haven't found a source in Canada yet.
 
I guess I would have never thought to look for an obviously imperial set of measurements in a list of metric o-rings, so thanks for that. I found it it one list of DIN sizes, but I haven't found a source in Canada yet.
I can send you some 9.52x1.78 NBR90 from Switzerland to Canada. Just let me know your address
 
I can send you some 9.52x1.78 NBR90 from Switzerland to Canada. Just let me know your address
Thanks to a postal strike in Canada, and then me getting busy with a new camera, it was long delayed, but I finally tried the o-rings from @Agro and they work great. I attach a picture of the rebuilt swivel under pressure with a transmitter on it. For comedy I attach a photo of the o-ring that the LDS overtightened the transmitter on a short HP hose. I think they didn't believe me when I said with the spool that exterior o-ring is just decorative.

Anyway, thanks to @Agro I now have another way of attaching my transmitter to the reg. I'm not sure about tucking the transmitter between the wing and tank. Alternatively I'd have to flip the reg, and probably swap hoses.
o-ring.jpgswivel2.jpg
 
OM systems OM-1
MkI or MkII?


I am looking at upgrading my 13-year-old EM5 this year and will upgrade to the OM-1 ii unless a newer one comes out this year.
 
MkI or MkII?


I am looking at upgrading my 13-year-old EM5 this year and will upgrade to the OM-1 ii unless a newer one comes out this year.
I bought a Mk I this year on clearance (USD1100).
 
Back
Top Bottom