Service Kit for Argon regulator

[bl6394]

I've got a Argon Inflation Regulator - by Dive Rite SKU: EX949.

Argon Inflation Regulator

Our Argon Bottle Drysuit Inflation Regulator is a compact first stage regulator that can be used on any 200 BAR DIN valve. Measuring only 2 3/8-inches (6 cm) tall, this is the most compact suit inflation regulator available. It has an unbalanced piston first stage with an intermediate pressure...

www.diverightinscuba.com

It's discontinued - but still working like a champ. Anyone have service kits for this?

Best,

Bjorn

 

[Mobulai]

I’m gonna make a guess it’s an mk2 clone..
but even these (clones) have variations in their oring/seat sizes

Best bet.. you disassemble it and try to match the sizes of parts
You got 3 orings and a HP seat in mk2s et al
An oring sizer sheet (print to scale to find the oring sizes) (the exact mk2 ones are 02-008, -015, -022 + the din ones 02-011 and -111; expect something in that range)

The tougher part is the seat; for the 1st go around you can just flip it and reuse it, but would be good to measure it with a caliper for OD and height before closing it up, so you can match it (mk2 seat size or a cressi or an AL…)

 

[happy-diver]

Or punch a plug from a cutting board tap it in then trim it

Not a wooden cutting board

 

[Mobulai]

Not a wooden cutting board

Steampunk reg with IP creep as a feature

 

[happy-diver]

Ha ha ha ha ha ha ha!