tmassey
Contributor
I have a number of SCUBA tanks for sale in Michigan. I have a set of HP100 doubles and a set of LP72 doubles. (Also some single tanks -- see the bottom for link.)
Steel High-Pressure 100 Doubles
These are PST HP100 Hot-Dipped Galvanized Steel. These are SP-9791 tanks which was just renewed, so there will be no issues with fills or hydros. The tank was born in 2005 and last hydroed in 2019/01. Both tanks have 2022/07 viz. Tank is filled with EAN32, and if dropped off will keep the fill. These are E7 tanks, with a service pressure of 3442 PSI. These tanks include Thermo Pro/Convertible Yoke/200-Bar DIN modular valves with isolation manifold. They are configured for DIN, but yoke inserts are available. They also have 2.5-inch stainless steel bands. $800
Steel Low-Pressure 72 Doubles
These are Dacor (made by PST) LP72 Tuff-Koate Steel. These are DOT 3AA-2400, so there will be no issues with fills or hydros. The tank was born in 1967 and last hydroed in 2022/07 -- practically fresh! Both tanks have 2022/07 viz. Tank is filled with EAN32, and if dropped off will keep the fill. These tanks were O2-cleaned and put together with brand new valves, manifold and tank bands at time of hydro. These tanks include Pro/Convertible Yoke/200-Bar DIN modular valves with isolation manifold. They are configured for DIN with yoke inserts included. They also have standard 7.25" diameter, 2.5-inch stainless steel bands with rubber spacer. These tanks have the same water volume as HP-100 tanks, though with a lower service pressure, and weigh noticeably less. $650
Photos
Photos are attached below. Click on the thumbnails to see the full version.
Shipping or Regional Dropoff
Shipping is always the problem. In this case, I do not want to ship them. In order to do so, I would have to tear them completely apart, and I don't want to. I'm seeing prices as high as $100 for 40 pounds 30x10x10 between Michigan and Los Angeles. Of course, exact amount can vary.
However, I am going from Michigan to North Florida next week (February 22/23, 2023). I would be happy to deliver them anywhere within 20 miles of I-75 for a fixed $50. If you're farther than that, we might be able to negotiate something, or we can simply meet at a gas station or parking lot and you can drive them the rest of the way.
Please let me know if you have any questions. Thank you very much!
I also have a bunch of single tanks you might want to see, with the same delivery terms!
scubaboard.com
Steel High-Pressure 100 Doubles
These are PST HP100 Hot-Dipped Galvanized Steel. These are SP-9791 tanks which was just renewed, so there will be no issues with fills or hydros. The tank was born in 2005 and last hydroed in 2019/01. Both tanks have 2022/07 viz. Tank is filled with EAN32, and if dropped off will keep the fill. These are E7 tanks, with a service pressure of 3442 PSI. These tanks include Thermo Pro/Convertible Yoke/200-Bar DIN modular valves with isolation manifold. They are configured for DIN, but yoke inserts are available. They also have 2.5-inch stainless steel bands. $800
Steel Low-Pressure 72 Doubles
These are Dacor (made by PST) LP72 Tuff-Koate Steel. These are DOT 3AA-2400, so there will be no issues with fills or hydros. The tank was born in 1967 and last hydroed in 2022/07 -- practically fresh! Both tanks have 2022/07 viz. Tank is filled with EAN32, and if dropped off will keep the fill. These tanks were O2-cleaned and put together with brand new valves, manifold and tank bands at time of hydro. These tanks include Pro/Convertible Yoke/200-Bar DIN modular valves with isolation manifold. They are configured for DIN with yoke inserts included. They also have standard 7.25" diameter, 2.5-inch stainless steel bands with rubber spacer. These tanks have the same water volume as HP-100 tanks, though with a lower service pressure, and weigh noticeably less. $650
Photos
Photos are attached below. Click on the thumbnails to see the full version.
Shipping or Regional Dropoff
Shipping is always the problem. In this case, I do not want to ship them. In order to do so, I would have to tear them completely apart, and I don't want to. I'm seeing prices as high as $100 for 40 pounds 30x10x10 between Michigan and Los Angeles. Of course, exact amount can vary.
However, I am going from Michigan to North Florida next week (February 22/23, 2023). I would be happy to deliver them anywhere within 20 miles of I-75 for a fixed $50. If you're farther than that, we might be able to negotiate something, or we can simply meet at a gas station or parking lot and you can drive them the rest of the way.
Please let me know if you have any questions. Thank you very much!
I also have a bunch of single tanks you might want to see, with the same delivery terms!
Sold! - SCUBA Tanks for sale: HP100 / LP121 / AL80 Singles in hydro!
I have a number of SCUBA tanks for sale in Michigan. I have three AL80 tanks, one HP100 and two LP121's. (Also some sets of doubles -- see the bottom for link.) Aluminum 80's These are Luxfer Aluminum 80's. Both are the "good" aluminum, and will have no problems getting filled! Two of them...
