Sold! Steel tanks: Singles, doubles, LP85, HP100, LP80, LP95

[Bearded Diver]

I have some SCUBA tanks I'm selling. I just have too many tanks... I need to thin the herd.

All tanks are standard 3/4" NPT tanks -- no narrow-neck tanks here! All tanks (except the PST HP100 doubles) are all out of hydro. All single tanks have yoke valves, all manifolds are 200 Bar Pro DIN/Yoke valves. See the bottom for upgrades, including valves, bands, manifolds and fresh hydro!

4 x Faber LP85 Steel
The best LP85's: the slightly-longer, slightly-narrower, slightly-lighter ones. They are two matched pairs, two made 04/2004 and two 09/2004. $250 each.

View attachment 865860


2 x Faber HP100 Steel
These are 3442 PSI HP100 tanks. These are a matched pair, made 05/2014. They were originally bought as a single set of doubles, though they are single tanks now. $250 each or $450 for the pair

View attachment 865861


2 x PST LP80 Steel
These are *very* similar to HP100's in size, shape, weight and tank factor (capacity at the same pressure). Hot dipped galvanized. They were originally bought as a single set of doubles, though they are single tanks now. Made 12/2002 and 1/2003, with same REE number. $225 each or $400 for the pair.

View attachment 865862


Set of PST HP100 Steel Manifolded Doubles
These are 3442PSI HP100's as manifolded backmount doubles. Hot dipped galvanized. These are a matched pair, made 03/2005. Hydroed May, 2024: good until 2029! Tanks and valves were O2-cleaned at time of hydro, for what that's worth. Manifold and bands are less than 3 years old. $775

View attachment 865863


Set of Faber LP95 Steel Manifolded Doubles
These are *very* similar to HP117's in size, shape, weight and tank factor (capacity at the same pressure). These were originally bought as a single set of doubles. Made 10/2007 and 02/2006, with the same REE number. $675 as doubles, or $450 as a pair of singles with yoke valves.

View attachment 865864


Accessories
The single tanks all have yoke valves. I have a few valves available to swap in as upgrades. OMS Pro DIN/Yoke: $25. OMS L/R independent manifold DIN/Yoke -- these would be used for sidemount tanks: $45 each as pair only.

I also have a couple sets of backmount manifolded doubles valves with 7-1/4" bands. $225.

Would you like the tanks to be in hydro? No problem: $40 for first tank, and $20 each additional tank.


Shipping
I'm happy to ship any of these items. Tanks will be shipped with valve removed. Shipping should be $35 per tank, and it's cheaper to send tanks individually than multiple tanks in a single package.

I''m hoping to make my way to Cave Country late November or early December. If you're interested, I would be happy to deliver them anywhere within 30 minutes of I-75 between Detroit and Gainesville (which includes High Springs/Ft. White, and I'll include Ginnie and Peacock! ) for $25 total. Farther off I-75 might be negotiable.

A post is limited to 5 photos, so if you want more photos or have specific questions, send me a DM.

I know this is an old thread and they sold, but I was curious what was used to make the drainage holes in the boots of the Fabers in the first image?

I imagine a circular cutter bit on a drill? TIA