mullannix930
Contributor
I got my Rolock 90 from EBay. I have one question. Is there an O-ring between the glove ring and the wrist ring that it locks in? I don’t see an o-ring other than the one that goes in the ring inside the glove.
Rolock 90 o-rings
- Thread starter mullannix930
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
It is in the wrist rings. The gloves twist into the locking wrist ring.
OP
mullannix930
Contributor
If I order new ones, what are they called or the part number?
OP
mullannix930
Contributor
I do have the o-rings but am going to order new ones. Are they the bayonet orings?
Yes on the bayonet rings, they don’t show pricing but the do show the size.
this may of mat not be cheaper,
I haven’t ordered any, $11 shipping
So close to $30 for 5 delivered, we can cut the cost if we group order to spread the shipping out.
OP
mullannix930
Contributor
What about the other O-rings? What are the specs for them? I have the blue glove ring.
I only made a few dozen dives on those rings. They never leaked, so the O-rings should be good for years.
OP
mullannix930
Contributor
They look great, now that I got good lighting and my glasses on. I’m just looking to get spares to keep in my drysuit save a dive kit. Can’t wait to try them in the water.
Things never leak until they do. Then you look and don't have the parts in your save-a-dive kit. Then cry.
The o-rings for the blue glove ring are 70mm x 3mm. You can find the mfr part number on their website under products. Sourcing o-rings from anywhere is easy when you know the spec.
Similar threads
