shaggie
Guest
So, I just recently registered a 12ft RIB and motort that I got from my dad. My question is what's the best way to affix the annual registration sticker to the pontoons so they won't peel off when I inflate/deflate the boat?
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
shaggie:So, I just recently registered a 12ft RIB and motort that I got from my dad. My question is what's the best way to affix the annual registration sticker to the pontoons so they won't peel off when I inflate/deflate the boat?
Thanks Donnie, but what I'm looking for are the blocks to affix the annual registration sticker to, like what you have on your boat. The hull # I can do with stencil and Sharpie. I can't seeem to find anything on line yet for said item. I'll be going to my local boat stores in next few days to see what they have to say.Donnie1442000:Hey Shaggy I dont know if you seen the ones on my boat but I used the same fabric as the boat is made out of. This way the gluing process is easy. There is a glue called Bobs (I dont remember the rest) but can be found in most hobby stores the stuff sticks to anything. There will be people who shoot me down because its permanent but that is also the only reason I got my last boat back. When they couldnt take the registration numbers off they dumped the boat. If you move out of state they can be ground off. Its a couple hour job but well worth the pains. The number can be found at most inflatable boat stores. If not buy a piece of the fabric and take it to a sign shop they have the dies to cut them out or a water cutter that will do the trick.