Regulator test rig you don't need to suck.
- Thread starter njmorrell
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Looks similar!I assume those are intake vents in the end by the speed controller (oh, just saw the ones on the top too)? Yeah, the vacuum pumps needs to get air in that gasketed box...
Nice, can you get to 3” of water with your pump?
Almost. Maybe 2.8.
I assume those are intake vents in the end by the speed controller (oh, just saw the ones on the top too)? Yeah, the vacuum pumps needs to get air...
Yeah, I put a few additional intake holes in the wall of the case at the end by the needle valve since the opening to the needle valve is so close to the wall. Probably not necessary.
Nice work!
Finally made something I can use with the pump without removing the mouthpiece.
I made a few improvements to my mouthpiece adapter so you don’t have to remove your mouthpiece if testing on the fly.
Mouthpiece plug would be an easy part to print.
Mouthpiece plug would be an easy part to print.
Mouthpiece plug I used.
This also works well if you don’t have the Scubatools mouthpiece adapter.
Similar threads
