You mean the vent?I mean instead of the drip valve....
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
You mean the vent?I mean instead of the drip valve....
You mean the vent?
I use a length (3 feet) of tubing teed from the pump output. One side goes to the mouthpiece the other is coiled up with the end open. Works perfect.Yes (from the schematic by @rsingler it is to reduce the vacuum volume "intensity", and is an adjustable valve)
Do think you could tell the difference in how they breath in a blind test?I'm not sure yet about better adjustment but it certainly enables better accuracy. For example I am able to discriminate between two identical Aqualung legend 2nd stages, one measures 7/8" wg and one measures 1" wg. That's 1/8" difference which is 1/16" on each side of the manometer.
I checked all my regs after I finished the test rig and all are within manufacturer's specification so I haven't actually done any adjustments
Fine be that way... yes input. LolInput, not output, we are talking vacuum.... (sorry, it is the engineer in me)
With a good set of lungs you could.Do think you could tell the difference in how they breath in a blind test?
Measure with a micrometer, mark with chalk, cut with an axe, hammer to fit
Not so sure:Input, not output, we are talking vacuum.... (sorry, it is the engineer in me)
If you look at the pump as a machine it’s the input. When you inhale your inputing not outputting. LolNot so sure:
Dictionaryout·put
/ˈoutˌpo͝ot/
Learn to pronounce
See definitions in:
All
Economics
Technology
noun
- 1.
the amount of something produced by a person, machine, or industry.
"efficiency can lead to higher outputs"