Question Regulator query

[Ale C.]

Hi everyone,

I never pay attention but I just reckon there's sound if I shake my mk19, is that normal? Thanks in advance.

Cheers,
Ale

 

[happy-diver]

Unscrew the faceplate and remove the diaphragm

 

[rhwestfall]

Unscrew the faceplate and remove the diaphragm

first stage... load transmitter is rattling. My guess is the environmental seal was put on with the reg not pressurized.

@rsingler

 

[Scared Silly]

When I shake my reg it goes “AAHHHH!” then goes quiet.

 

[rongoodman]

Do you feel the urge for a cigarette following this?

 

[Mobulai]

umm, just on the off chance -- is the DIN wheel (if DIN) held "tight" when doing so? it should be clank a bit against the body if not held relative to the body
I had a scare back in April then I realised it was just the din wheel going up and down the retainer shaft -- felt like a once I realized

 

[Ale C.]

first stage... load transmitter is rattling. My guess is the environmental seal was put on with the reg not pressurized.

@rsingler

I may have to find a schematic to study this, not very sure I fully understand. But is that normal? Cheers.

 

[Mobulai]

I may have to find a schematic to study this, not very sure I fully understand. But is that normal? Cheers.

I don't fully understand as well how but this might clear it up a bit

schematics are here as well