Regulator Geeks: Scubapro Mk19EVO - teardown & discussion

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

This almost looks like an invitation…

Feel free.
We also have cave's. And Budapest is 3hrs away on a good day if the border is OK. And with that it's the Molnar Janoš cave. And flooded mine.

Ohrid and 300m deep dives if you're into it is some 5hrs away, and Croatian coastline is 6-7hrs away.

We might not have any sea access, but that doesn't mean we don't love diving. 😂
 
As a few of you have requested, I'm going to host a Zoom discussion on the new Scubapro Mk19EVO.

Date: Tues, Jan 18th
Time: 6:00pm-7:30pm PST (9p-10:30p EST)
Hope that works for both West Coast'ers getting home from work, and East Coast'ers going to bed.

We'll compare it with the Mk17 (and the Mk25).
We'll compare schematics and open up all three regs.
We'll look at the crispness of IP lockup, and also compare IP shift from full to empty tank.
We'll look at advertised flow numbers.

I'll do a reassembly demo, just to show ease of service, but this is won't be a DIY service course.

And we can argue about it! :gas:

Zoom meeting connection info will be posted here before the session.
I'm in, thanks Rob
 
https://www.shearwater.com/products/teric/

Back
Top Bottom