Preferred solvent for cleaning DUI trilam (interior-side) for Si-Tech neck ring installation.

[divad]

MEK, Acetone, Alcohol...etc

Also have some old contact cement to remove.

 

[michael-fisch]

I use Nitro Solvent, and Acetone.

Michael

 

[EdC]

I used acetone, and the PU tape rings from DGX. Sealed the edges both sides with aqua seal and it has held up perfect.

 

[Sean Walberg]

I used MEK for the neck and wrist seals. Had to get rid of a lot of former glue especially on the neck.

 

[happy-diver]

or toluene

 

[divad]

or toluene

Ah Touelene...I'll tyr to remember that....

 

[Peter Slater]

I have a similar project but my suit is a DUI CF200. Are any of these solvents good on neoprene?

 

[divad]

Denatured alcohol took the old cement right off. Fast.