For those of you with Scubapro Jets, drill two holes no larger than 1/8" into each side of the foot pocket preferably close to the toe area. This will make removing the fin abit easier because there's no vacuum effect.
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
OOOOOHHHH - OJ for breakfast...now I understand why I had a problem (only once and did not understand why)!!justleesa:Don't forget to take your motion sickness pills early and don't eat or drink things with high acidic levels such as OJ, cranberry juice etc before the dive. You can guess how I know
Whale Whisperer:For those of you with Scubapro Jets, drill two holes no larger than 1/8" into each side of the foot pocket preferably close to the toe area. This will make removing the fin abit easier because there's no vacuum effect.
Jorbar1551:Dont pee in a drysuit when you dont have a pee valve
Whale Whisperer:For those of you with Scubapro Jets, drill two holes no larger than 1/8" into each side of the foot pocket preferably close to the toe area. This will make removing the fin abit easier because there's no vacuum effect.
I attach all my wrist instruments (being sure that the the others are far enough away from my compass) to the sleeve and then pull it on in one piece and keep it in a small pelican box for protection.MyDiveLog:Finally, if you dive with a wrist-mounted computer, save the arms from an old wetsuit. I cut off about 6" from the arm, cut a hole that my drive computer fits through, and now have a secure way to make sure my dive computer doesn't come unlatched while diving.
MyDiveLog:If you can afford it, the California Dive Box is a great way to carry all your gear and your tank in one place. Rather than buy their "wheel upgrade," I spent $30 at the hardware store for a new axle and two solid 8" buggy wheels, which makes it even easier and quieter to pull. Plus, unlike with the conversion kit, the wheels CAN'T go flat.