Pony Tips

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

All answer posted make sense, after is a personnal preference, you need to experience different configuration and see what you like. You should ask yourself one or two questions being :

Why do you need specificaly a 40 CF ?
What's the deepest you will go ?
Calculate sac and RMV and choose cyclinder after.

You instructor will help you out.

Be safe
 
You are also missing something important in the advice above. With a back mounted pony, you can not see a leak, you may not be able to monitor pressure and you can not feather the valve on and off during a free flow failure. In addition, a back mounted pony regulator can be confused with the primary tank second stage which, can and has, resulted in fatalities. This type of confusion is almost impossible with a slung bottle.

Also should the diver develop a leak or failure of hose etc. they may not be able to easily discern the source of the failure- primary or pony bottle, when back mounted.

There are significant safety sacrifices one makes for the convenience of back mounting a pony bottle.

The first decision a diver needs to make is how they are going to mount the pony and then choose a size and then figure out rigging and hoses etc. in that order.

Dude, just imagine in a different time and a different place, if these people actually had their
gear serviced properly and actually knew how to dive how magnificent a place that would be


That place would be here

the convenience of back mounting a pony bottle

in a shark in their environment friendly place like this

186 DSC06693.JPG


but come on for sure never ever like this no matter any concerns any one could raise never ever like this

=1303,977&ownerId=A1IK62AHM51FH5&groupShareToken=IRKp7WG5Q_S2b87KoK7uQQ.sM2AKwLJFWsvslMvIXF9IJ.jpg


Which is how I see the pseudo wanna be tech slingers slinging and even some tech slingers slinging too

oh and when their little bottle hits them in the face
launching themseves from a boat into the ocean wilderness
usually only once, or maybe even sometimes more


It's okay I still have my hand


I think I might go hang a pig under an aeroplane for christmas, maybe one under each wing for balance
 
Hopefully they will go on to get proper training and understand the system.

+1 Training and practice are critical. A good solo/self-reliant diver course is very helpful. Regular practice with the pony is also critical. Skills need to be developed, locked into muscle memory, and practiced regularly.
 
One picture of a poor fellow who is the poster child for not being squared away, dangly and all ugly does not mean that another fellow could not be squared away, snugged up and all pretty. The only thing he is missing is a Spare Air attached to his pony. Hey, that is an idea, Two Gun McGraw, one is not enough, bring two.

The lower D-ring needs to be up at the harness location to the plate. The upper attach needs a bungee to control swing and snug it up tight. Both connections need to be as short as possible. It really is not hard and the unit pretty much dissaapears in use.

But I like back mounted also and IDs so there you go.
 
One picture of a poor fellow who is the poster child for not being squared away, dangly and all ugly does not mean that another fellow could not be squared away, snugged up and all pretty. The only thing he is missing is a Spare Air attached to his pony. Hey, that is an idea, Two Gun McGraw, one is not enough, bring two.

The lower D-ring needs to be up at the harness location to the plate. The upper attach needs a bungee to control swing and snug it up tight. Both connections need to be as short as possible. It really is not hard and the unit pretty much dissaapears in use.

But I like back mounted also and IDs so there you go.

I agree with this - there are many examples of poor rigs to be seen in the world of scuba diving. I've seen my fair share of octopus 2nd in the sand and mud over the years.

You can mount the bailout on your back in a "pony" configuration for solo diving. For some people this can be an advantage possibly. The main drawback is the access to the tank valve is near on impossible to reach. However if the bailout freeflows just take it in your stride and head back up. A side mounted rig would have saved the dive.

A back mounted rig can still have a spare inflator hose but it is less udeful. The pressure gauge needs to be on a hose so you can see it.

Personally if using that system I would invert the bailout (now you can reach the valve) and use the 2nd stage to replace the octopus from the conventional buddy rig. This way it works for solo and buddy diving too. A bit longer hose on the bailout is a plus if you use it that way and for buddy/solo deployment.

One great afvantage of solo diving is there is no one else to argue about how you deploy your kit :D
 
Hopefully they will go on to get proper training and understand the system.
oh
I agree with this - there are many examples of poor rigs to be seen in the world of scuba diving. I've seen my fair share of octopus 2nd in the sand and mud over the years.

You can mount the bailout on your back in a "pony" configuration for solo diving. For some people this can be an advantage possibly. The main drawback is the access to the tank valve is near on impossible to reach. However if the bailout freeflows just take it in your stride and head back up. A side mounted rig would have saved the dive.

A back mounted rig can still have a spare inflator hose but it is less udeful. The pressure gauge needs to be on a hose so you can see it.

Personally if using that system I would invert the bailout (now you can reach the valve) and use the 2nd stage to replace the octopus from the conventional buddy rig. This way it works for solo and buddy diving too. A bit longer hose on the bailout is a plus if you use it that way and for buddy/solo deployment.

One great afvantage of solo diving is there is no one else to argue about how you deploy your kit :D
solo is the way
 
https://www.shearwater.com/products/swift/

Back
Top Bottom