PLBs and DSMBs

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Where did you get this info?

See July 1st 2003 date for this:

However, the EPIRB/PLB technology was not legal for use in land based applications until July 1, 2003. Governed by the FCC (Federal Communications Commission) it was not available because there was not a unified overseeing body for land-based rescues. In a marine environment, there is only one rescuing agency, the US Coast Guard, so coordinating rescues and responses has been a relatively easy task.

Probably see same on FCC webpage too.

Here is the same essentially from FCC:


It says 2002.
 
Mistake meant Nautilus Life Line. It is not a PLB. User can change the two batteries it uses, but Care must be taken and change oring to be sure. Anyway it has a very good depth rating. Not so the PLB 400. Though why not put them both in the big waterproof container if possible.
As you said Nautilus Lifeline has very good depth rating. So it doesn’t need to put it in waterproof container. I took it down to 40m without any problem. You need to put the silicon jacket over it though to prevent the latch from getting caught / hit something & unlatched underwater.
 
As you said Nautilus Lifeline has very good depth rating. So it doesn’t need to put it in waterproof container. I took it down to 40m without any problem. You need to put the silicon jacket over it though to prevent the latch from getting caught / hit something & unlatched underwater.
With the FCC link on PLB a down load file shows, ACR and Mc Murdo Ltd being mentioned. They were starting first trying looks like 2001.
 
You need to put the silicon jacket over it though to prevent the latch from getting caught / hit something & unlatched underwater.
Ok, I have not tried this, the latch on mine is very hard to open, 'tight as drum'.
I have mine in my tech shorts with the safety sausage and reel [Scubapro light weight ones for warm water and the Apeks heavy duty one for around here].
A tight fit in the Scubapro pockets, could unclip in those if pulled out in a hurry, something to think about.🤔
 
I carry both PLB1 & Nautilus Lifeline nexGen (NLn), as shown below. If I’m lost at sea, but I still see boats in horizon, then I’ll launch NLn. If I don’t see any boat in horizon, then I launch my big gun, the PLB1.

Here’s my “newest/greatest/comes with the Happy Meal” signaling devices. The PLB1 case is shorten to just fit PLB1 & it’s tethering string (red) to the lid. All of the items on the left side of the picture are fit inside my left BCD pocket & tethered to D-ring outside the pocket. My DSMB & finger spool fit inside my right BCD pocket.

View attachment 894486
Update:

I lost my PLB1 cradle and Rodney of Trionics graciously gave me his spare cradle as shown below:

IMG_6284.jpeg



Here’s how the cradle attaches to PLB1.

IMG_6285.jpeg


The black rubber band is looped around the BCD shoulder strap so you can have the PLB1 sits on top of your shoulder with its antenna pointing up and the flashing strobe light aiming up towards the sky, as shown in the previous post.

I find a good place to store the cradle and the rubber band on my storm whistle, as shown below.

IMG_6287.jpeg


The whole kit fits inside my left BCD pocket. When I need them, I just unzip my left BCD pocket and pull the leash out.

IMG_6290.jpeg
 
Back
Top Bottom