P-valve on Fusion

[girlwithbigtanks]

My buddies with fusions have it outside. I’d mark the skin while I’m wearing it, find cooper pipe the right diameter and melt the hole myself.

Have you bought your urinating device?. I suggest grooming and practice peeing at home before you attempt on a dive. To be honest the dive needs to be seriously long enough to deal with the grooming obligations.

 

[Marie13]

My buddies with fusions have it outside. I’d mark the skin while I’m wearing it, find cooper pipe the right diameter and melt the hole myself.

Have you bought your urinating device?. I suggest grooming and practice peeing at home before you attempt on a dive. To be honest the dive needs to be seriously long enough to deal with the grooming obligations.

I’ve had my She-P for 3 years. Tried it a few times at home. Never dove with it for various reasons. Experimenting at home to get best positioning, etc. Not dealing with the nasty squishy filled diapers will be nice enough.

 

[WarrenZ]

Mine is mounted through both layers I like it keeping the skin from sliding around.

 

[Asheron]

Mine is through both skins. I also drilled additional holes through the top cap because I felt like it didn't flow as well as the Halcyon.

20191229_163759

• Asheron
• Dec 29, 2019

20191229_163754

• Asheron
• Dec 29, 2019

20191229_163815

• Asheron
• Dec 29, 2019

 

[TTPaws]

I have mine outside as you can see in the picture for over 10 years. As you can see I lost the bolt that goes in to the valve, probably about 5 years or so ago They wanted about $8 for a new one.

 

[decompression]

Input mine in the pocket....never lose the screw but be careful with your wet notes, lol

 

[_Ralph]

Having installed my own before, just leave it on the inner core...

Yes the inflator and dump valves are on the outside, but look at the suit construction... there’s less material movement in those spots ... unlike the lower torso and leg areas.

I’ve never had a need to close my p valve, and on a new suit, roll offs are a real thing!


_R

 

[Marie13]

Having installed my own before, just leave it on the inner core...

Yes the inflator and dump valves are on the outside, but look at the suit construction... there’s less material movement in those spots ... unlike the lower torso and leg areas.

I’ve never had a need to close my p valve, and on a new suit, roll offs are a real thing!


_R

Might as well just leave it alone and see how it works.

 

[martincohn]

Might as well just leave it alone and see how it works.

I figured out I just do the same. Just ordered a Fusion Bullet Thanksgiving week. DRIS recommended just through the aircore. Figured I'd try it that way and can always punch it through the skin if needed later.