Closed: OMS end caps, part no. V112

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

stretchthepenn

Contributor
Messages
665
Reaction score
674
Location
Atlanta, GA
# of dives
500 - 999
I'm looking for two OMS end caps--part number V112-- for a doubles manifold. I want to remove the isolator valve and create a mirrored set of valves for sidemount diving.

I've also got another WTB post up in search of an LH DIN valve that will fit a 7/8 UNF thread.

Thanks for reading.
 
good luck on the 7/8" valves, unlikely to find those, better off looking for a full manifold or selling the tanks.

for the caps, contact Bill Routh at Jocassee Scuba, he has a bunch of them last i checked
 
Thanks for the advice, tbone1004. I've got a line on an OMS manifold, but I'm hesitant to buy it unless I can for-sure get the end plugs. I've called Jocassee Scuba and left a message.
 
They are VERY hard to find......maybe better dollar wise to get a DGX manifold for $99 that includes plugs.
 
IIRC, the OMS caps are $14 each from the shop mentioned. I have the price posted in another thread somewhere. A brand new XS Scuba 7/8" manifold will run you over $300.

I am not sure if the caps for the 7/8" and 3/4" manifolds are the same. Probably?

I have a used 3/4" OMS manifold with one cap I'll sell you for $55 shipped, if you're interested.
 
IIRC, the OMS caps are $14 each from the shop mentioned. I have the price posted in another thread somewhere. A brand new XS Scuba 7/8" manifold will run you over $300.

I am not sure if the caps for the 7/8" and 3/4" manifolds are the same. Probably?

I have a used 3/4" OMS manifold with one cap I'll sell you for $55 shipped, if you're interested.
Thanks for the offer, but I can only use valves with the 7/8 UNF thread, and I got in contact with a dive shop that has the caps I need. Thank you, all the same.
 
https://www.shearwater.com/products/swift/

Back
Top Bottom