Need Dive Buddy July 22-23 La Jolla

[phage30]

Dear kf6cxf

Please do not bring extra tank for me. I use NITROX and I can not use air with my regulator. I do not want to contaminate it. But thank you for your kindness.

I will try to be there and will join you for your first dive. Since we are 3, for the second dive you and tghd can go together.

 

[divinman]

Dear kf6cxf

I use NITROX and I can not use air with my regulator. I do not want to contaminate it.

What kind of reg are you usiing. I div trox with the same reg i dive air with and havent burst into flames yet. Scubapro MK25 S600.

Divinman

 

[phage30]

What kind of reg are you usiing. I div trox with the same reg i dive air with and havent burst into flames yet. Scubapro MK25 S600.

Divinman

I have Scubapro MK25/X650 but I am following my instructor's advice to dedicate this regulator only for NITROX.

 

[ShakaZulu]

You can mix air/nitrox with any reg as long as you dive nitrox less than 40%. Are you guys going to be diving Friday morning???

 

[kf6cxf]

ok phage30

 

[kf6cxf]

You can mix air/nitrox with any reg as long as you dive nitrox less than 40%. Are you guys going to be diving Friday morning???

i can dive friday morning (7am) ShakaZulu.

 

[ShakaZulu]

i can dive friday morning (7am) ShakaZulu.

I'm too busy Thursday, can't pickup a tank.........damn.

 

[ShakaZulu]

I have Scubapro MK25/X650 but I am following my instructor's advice to dedicate this regulator only for NITROX.

Did your instructor tell you about this???

http://www.scubaboard.com/t59417.html

 

[phage30]

Thank you for the info. No they did not tell me anything but I fund this:

"There was a limited number of original units that they wanted to take back and replace. In the first run, there was a machining burr left on a piece of metal, that ended up wearing on a nylon bushing. In time, the bushing would get worn by the burr and it would affect breathing. The regs would breathe great at first... but get worse - normally after about 20 dives.

If you registered yours, and bought it from an authorized dealer, they should have contacted you concerning it. Where ever you bought it, have them contact Scubapro with the serial number and see if yours is affected by this.

Larry"

I emailed the Scubapro and will wait for thier answer.

 

[phage30]

kf6cxf & tghd

So we will meet around 6:40 AM July 22 at La Jolla cove, right?