Be very careful and make sure you have the right sized Hex wrench or bit to install this. It is possible to over torque and spall the hex fitting. Too loose and you might have leaks or loosening in the regulator.
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
Be very careful and make sure you have the right sized Hex wrench or bit to install this. It is possible to over torque and spall the hex fitting. Too loose and you might have leaks or loosening in the regulator.