Mk5 high pressure seats

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Joris Vd

Contributor
Messages
289
Reaction score
280
Location
Belgium
# of dives
200 - 499
Hello everyone I've started working on two mk5's I have laying around and I noticed that they both have different pressure seats.
One seems to have a classic flat surface and the other a curved one like the mk10 high pressure seats.
UuD6zdl.png

5TBthrK.jpg


Should I try to source a separate one for each one or can I use either?

With kind regards,

Joris
 
You can use either. Aftermarket seats come both flat and with cone surfaces. The gray cone is a standard Scubapro Mk 5/10 seat, and comes in three heights allowing you to adjust IP in ~4-5 psi increments without adding shims.
 
https://www.shearwater.com/products/swift/

Back
Top Bottom