Mk 25 evo Yoke to DIN torque?

[Shabaday]

I have the DIN conversion kit for the Mk25evo. Do you torque the 6mm to 30 newton meters? And the 4mm to 4 newton meters like you do on the Mk17?

 

[scrane]

Yes, according to the schematic from Bryan's website.
May he live on.

 

[BoltSnap]

personal.filesanywhere.com/ViewPlay/linkViewPlayWrapper.aspx?Path=%5CBLPEN163%5CManuals%20and%20Catalogs%5CScubapro%20schematics%2C%20Parts%2C%20Service%5C1st%5CMK25%5C10-713-0X0%20MK25%20EVO.pdf&MP=&FI=3502474&VT=F&RT=N&Type=F

Link doesn't work

 

[scrane]

Yes, I see that.
If you go to vintagedoublehose .com and follow Manuals and Catalogs at the bottom of the page and follow the proper tree you'll get there. Long story short the Mk25Evo schematic verifies the settings as above.

 

[BoltSnap]

https://personal.filesanywhere.com/fs/v.aspx?v=8d6d638a5f6075b5a46a

 

[BoltSnap]

Mk25Evo schematic attached

 

[Shabaday]

Thanks that confirms number 10 to be at 30nm and number 8 to be 4nm.