high_order1
Contributor
ok
be right back
be right back
Looking for Copy of Galileo Sol Trimix Firmware
- Thread starter aquaalexhart
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
high_order1
Contributor
They never responded. (shrugs)
high_order1
Contributor
I need the apnea function on my Sol.
(google translated it as:
Ho bisogno della funzione apnea sul mio Sol.)
(google translated it as:
Ho bisogno della funzione apnea sul mio Sol.)
Stunni
Registered
- Messages
- 65
- Reaction score
- 34
- # of dives
- 200 - 499
check pn
high_order1
Contributor
Hey Stunni.
Think mine is a lost cause.
Has trimix that I don't need, SW 6.2 and won't roll back to any of the 1.x FW I have found.
The other guy says the manufacturer sent him a patch for apnea based on his serial number, I tried them again, and this time they didn't even respond.
Think I am about done trying.
Thanks, though
Think mine is a lost cause.
Has trimix that I don't need, SW 6.2 and won't roll back to any of the 1.x FW I have found.
The other guy says the manufacturer sent him a patch for apnea based on his serial number, I tried them again, and this time they didn't even respond.
Think I am about done trying.
Thanks, though
Stunni
Registered
- Messages
- 65
- Reaction score
- 34
- # of dives
- 200 - 499
wait befor give up.
you HAVE to get back to 1.6 or somewhat because thats the "normal air" function of this computer.
then you can roll that apnea thingi over...
the TMX 6.x version BASES on that normal mode but hat more developents of Trimix stuff. but needs more power, so less stamina of the battery.
try it, you donßt lose anything, cause you can switch back again...
what are we talking about? 20yrs old Computer? it will die in a few years when the pressure sensors or something else wears down..., so what..
good bubbles!
you HAVE to get back to 1.6 or somewhat because thats the "normal air" function of this computer.
then you can roll that apnea thingi over...
the TMX 6.x version BASES on that normal mode but hat more developents of Trimix stuff. but needs more power, so less stamina of the battery.
try it, you donßt lose anything, cause you can switch back again...
what are we talking about? 20yrs old Computer? it will die in a few years when the pressure sensors or something else wears down..., so what..
good bubbles!
high_order1
Contributor
Ok,
I will try with 1.4 and see if it will go all the way back.
Too bad we don't have a copy of the dive center version, I bet there would be no problem then!
Hey, just because it's old doesn't mean it's not a good value!
I will try with 1.4 and see if it will go all the way back.
Too bad we don't have a copy of the dive center version, I bet there would be no problem then!
Hey, just because it's old doesn't mean it's not a good value!
high_order1
Contributor
So,
Three hours later, apparently I need 5.1. Anyone know where to find?
Mine is on 6.2.
none of these work
Three hours later, apparently I need 5.1. Anyone know where to find?
Mine is on 6.2.
none of these work
Similar threads
