Looking at tech. Style fins need help deciding which fin is best for me

[buddhasummer]

On your Jet Fins Revos are the blades longer than the normal Jets? If memory serves me my Jets are 7.25 from tip of blade to the bottom of the vent. By bottom of vent I am referring to the end of the vent closest to the blade tip.

In Japan, specs as follows:

Jets:

Size	M	L	XL	XXL
Boots size	23-25cm	24-27cm	27-29cm	-Cm
Blade length	445mm	470mm	555mm	-Mm
Weight (1)	1000g	1200g	1400g	-G

Revos:

Regular 484mm 1200g each boots size: 25-27cm
Grande 508mm 1300g each boots size: 27-29cm

I use Regular Revos.

Hope this helps. Cheers.

 

[rongoodman]

I used the Dive Rite fins before the Slipsteams came out in smaller sizes and liked them. I think the Slipstreams are a little more compact and maneuverable, but either work OK for me.

 

[buddhasummer]

On your Jet Fins Revos are the blades longer than the normal Jets? If memory serves me my Jets are 7.25 from tip of blade to the bottom of the vent. By bottom of vent I am referring to the end of the vent closest to the blade tip.

sorry just re read your question and realised the information I have given is not what you asked for, I will find a tape measure and measure them and re post.

 

[Mopar]

sorry just re read your question and realised the information I have given is not what you asked for, I will find a tape measure and measure them and re post.

Thanks. Darn "Standard" as we call it vs. Metric.

 

[irishsquid]

Thanks. Darn "Standard" as we call it vs. Metric.

Divide the mm measurements by 25.4 or cm measurements by 2.54 for inch equivalents
or, Multiply the mm measurements by 0.03937 or cm measurements by 0.3937 for inch equivalents

 

[buddhasummer]

On your Jet Fins Revos are the blades longer than the normal Jets? If memory serves me my Jets are 7.25 from tip of blade to the bottom of the vent. By bottom of vent I am referring to the end of the vent closest to the blade tip.

Sorry forgot. Ok if I understand your points of measurement, from the lowest point on the tip of the blade to the beginning of the vent my Revos measure 20.5cm/8.08". Looks like the Revos are a little longer.

 

[Mopar]

Sorry forgot. Ok if I understand your points of measurement, from the lowest point on the tip of the blade to the beginning of the vent my Revos measure 20.5cm/8.08". Looks like the Revos are a little longer.

Thank You buddhasummer.