Kidde compressor (Tampa Bay)

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

loquat149

Contributor
Messages
319
Reaction score
30
Location
Clearwater, FL
# of dives
500 - 999
Posting for a friend. Please direct all inquiries to Jason at jnewell21@tampabay.rr.com.
=======================================================

Model aE2-4v1 is a Kidde compressor delivering 2.4CFM @ 4500PSI. Unit is equipped with interstage cooling and pressure relief valves. Electric power is an Industrial Leeson, 2HP, 3500rpm, single phase, 115/230vt open drip motor. The compressor is direct drive through a lovejoy coupling. This unit has manual ON/OFF electric switch. The moisture trap and filter are commercial 5000PSI rated assemblies providing OSHA grade "E" quality breathing air or very dry air for paint ball and hp airguns. Filter cartridges are manufactured by Lawrence Factor of Miami Fl. The compressor moisture/filter system includes a back pressure valve, manual moisture drain and a safety relief valve to limit delivered air pressure as specified by the customer (up to 5000PSI). Filling whip for one tank is included with unit.

Asking $2500 for the compressor. It has been used just twice so far and comes with a re-packable cartridge and a disposable filter pack.
 

Attachments

  • compressor.jpg
    compressor.jpg
    84.1 KB · Views: 270
https://www.shearwater.com/products/peregrine/

Back
Top Bottom