instructions for atomic din to yoke

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

If anyone else reads this thread who is in the same boat, before taking off the DIN you may want to make sure you have a socket that is thin wall / low profile enough to fit inside of the yoke housing, since the allen key is only used for the DIN fitting. Peter Built sold a socket that fit. Also make sure that you have an extension small enough to fit through the knob side of the yoke housing.

Rob
 
If anyone else reads this thread who is in the same boat, before taking off the DIN you may want to make sure you have a socket that is thin wall / low profile enough to fit inside of the yoke housing, since the allen key is only used for the DIN fitting. Peter Built sold a socket that fit. Also make sure that you have an extension small enough to fit through the knob side of the yoke housing.

Rob

Now if only PeterBuilt was still in business... :(
 
A few folks have made their own with a regular socket and a dremel tool
 

Back
Top Bottom