Ingersoll rand Compressor

[scuba1456]

Hey guys I am trying to find out some info about a compressor I have a line on. But i tryed typing the model number into Ingersoll Rands Web site and came up blank.

Do any of you know the specs (or know where to get them) for a IR BAP9KH1 compressor.

 

[frogman62]

IR currently makes only the 15T4 compressor with 10,15,& 20 Hp motors.
I suspect this is a fabricated compressor configuration using the IR block.
Several companies made these in their configuration. IF you have pictures and a good configuration description we can give better information
Jim Shelden

 

[iain/hsm]

The IR BAP tells you that it's an Ingersoll Rand Breathing Air Package

The old Red Baron fire department packages had similar BAP model numbers.

Best advise I can give is get the serial number and hours run then check with IR direct

on spares and a service parts cost.

 

[scuba1456]

thanks guys...it ended up being kind of a bust. the compresseor was a 15t4 ... that was great but the big hole in the block was not.... so i am still looking.