Inflator Hose leak

[k4kafka]

Have a persistent air leak from my BCD inflator hose (old model Zeagle Ranger). Do I need to replace the whole unit ?

 

[Ghetto Diver]

Have you removed the hose clamp? From where you indicate the leak, there may be a slit in the hose. If so, simply replace the hose.

 

[decompression]

As mentioned, remove the clamp and inspect to hose. If required you can replace just the hose for about $15-20.

 

[tc]

Take the hose off the fitting and see if either has cracks in them.​

 

[tbone1004]

remove clamp, inspect hose, replace hose if necessary. Odds are unlikely the elbow is broken.
Corrugated Hoses
hoses here

 

[k4kafka]

Thank you all for your input. Good logical suggestions.

 

[redacted]

While you are waiting for your new corrugated hose, you should be able to add a zip tie just below that hose clamp and stop the leak. I have not had much luck with those hose clamps and, in your case, I suspect the hose damage was caused by that hose clamp. I use two zip ties in place of those original clamps. Your old hose should seal with the zip tie so it could serve as a backup.

 

[diversteve]

http://www.mcssl.com/store/zeagleex...cd-components/bcd-corrugated-replacement-hose