regulator bj
Contributor
Another reg. that has a similar 2nd stage is the Z90 not sure if they still trading or this is a retail out tag.
Identification of old Sportsways regulator and where to find a diaphragm for it
- Thread starter Wunder
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Thanks for all answers!
Seems it will be difficult to find a match.
What are the diameters commonly available out there?
Worst case I'll make an adaptor for a smaller diaphragm.
Original diameter is 74 mm. What is that in imperial?
---------- Post added at 09:01 PM ---------- Previous post was at 08:50 PM ----------
Oh ****, just found a 75 mm diaphragm on ebay!
Will order right away and se if it fits.
Seems it will be difficult to find a match.
What are the diameters commonly available out there?
Worst case I'll make an adaptor for a smaller diaphragm.
Original diameter is 74 mm. What is that in imperial?
---------- Post added at 09:01 PM ---------- Previous post was at 08:50 PM ----------
Oh ****, just found a 75 mm diaphragm on ebay!
Will order right away and se if it fits.
krawlings
Contributor
If any one is in a need for a copy of the Sportsways parts list and repair manual. .i could get you a copy . just the cost of printing it and shipping it.Has 71 pages or so covers water lung 100, water lung 200 , sport diver regulator II , hydronaut II , navy unit III , atm 1000 , atm750 ,atm 500 , sport diver regulator III, hydronaut III , navy unit IV , AND SOME OTHER SPORTSWAYS equipment. if intorested give me a PM
Last edited:
regulator bj
Contributor
Thanks krawlings for "Sportsways" manual recived Wednesday 11th April
Update:
Got the 75 mm diaphragm and it fits *almost* perfectly. Only trouble is the rim which was too thick to allow both the "push rubber thingy" and the plastic cover to fit with the metal retainer.
Shaved off ~1 mm with a knife and now everything is in place and working nicely.
Suprised at how easy it is to breathe from! A lot less resistance than my primary Scubapro R295 even though the age difference is probably ~30 years.
Guess things haven't evolved quite as much as many of my fellow divers and diveshops would have me believe ("That old junk is unsafe to dive with!").
Got the 75 mm diaphragm and it fits *almost* perfectly. Only trouble is the rim which was too thick to allow both the "push rubber thingy" and the plastic cover to fit with the metal retainer.
Shaved off ~1 mm with a knife and now everything is in place and working nicely.
Suprised at how easy it is to breathe from! A lot less resistance than my primary Scubapro R295 even though the age difference is probably ~30 years.
Guess things haven't evolved quite as much as many of my fellow divers and diveshops would have me believe ("That old junk is unsafe to dive with!").
easydiver1
Registered
My friend Jerry tells me he has many parts for your reg. He is having trouble getting on the site. Send me a PM and I will put you in touch with him.
Similar threads
