Question I want to create an indicator light window for the equipment. What is the structure like?

[Water bird]

I would like to know the structure of this indicator light. If anyone has worked on a similar project, please let me know. Thank you!

 

[Mobulai]

The best idea I got is how pressure sensors are installed on DIY bottom timers/dive computers


Scroll down to „sealing the pressure sensor“ here:

Assembly - Watertight case

Your DiveIno has to be placed into an Otterbox Pursuit 40 watertight case. It is water resistant up to 30 meters (100 feet), therefore it is a good candidate for recreational scuba diving. The LCD scr

diveino.hu

It’s probably overkill as the led in your case doesn’t need to be exposed to ambient/outside pressure; so a simple dome (with mechanical support from the inside, eg. a shoulder to rest on the main case) and sealing could work beautifully

 

[Mobulai]

Follow up questions:
What is this build for (if you feel like sharing)?
What construction methods are involved?(3d prints, off the shelf products…)
What level of waterproofing do you need? (What depth rating are you hoping for?)


Edit: if 3d prints are an option check this video out, @~8m

 

[Water bird]

Follow up questions:
What is this build for (if you feel like sharing)?
What construction methods are involved?(3d prints, off the shelf products…)
What level of waterproofing do you need? (What depth rating are you hoping for?)


Edit: if 3d prints are an option check this video out, @~8m

Thank you for your response, Mobulai. This project is intended to be used on an ROV device at a depth of at least 100 meters. I’m not sure if 3D-printed components can withstand this pressure, considering the window has a diameter of only 4mm.

 

[Mobulai]

Very cool indeed -- look forward to hear more about the progress of it

Thank you for your response, Mobulai. This project is intended to be used on an ROV device at a depth of at least 100 meters. I’m not sure if 3D-printed components can withstand this pressure, considering the window has a diameter of only 4mm.

100m+ is probably very tough for a 3d printed hull, you are right.
In the video above they sealed FDM to 85m already, but the part I was referring to at minute 8 in the video shows only a 3d printed holder (that attaches from the inside) + a waterproof lens selead, with epoxy; that has much better chances of withstanding 100m+ I would say

the smaller your window (4mm is pretty small), the less you have to worry about pressure diffrential (and potential leaks)

One other method is tapering a thread for the window, and having an o-ring on the mating part (that has the window) in the style of diving lights
but that's much more complex to achive

 

[Water bird]

Very cool indeed -- look forward to hear more about the progress of it


100m+ is probably very tough for a 3d printed hull, you are right.
In the video above they sealed FDM to 85m already, but the part I was referring to at minute 8 in the video shows only a 3d printed holder (that attaches from the inside) + a waterproof lens selead, with epoxy; that has much better chances of withstanding 100m+ I would say

the smaller your window (4mm is pretty small), the less you have to worry about pressure diffrential (and potential leaks)

One other method is tapering a thread for the window, and having an o-ring on the mating part (that has the window) in the style of diving lights
but that's much more complex to achive

Thank you for the information you provided, Mobulai. If I manage to design something better, you’ll be the first to know. I’ll carefully study the details you shared.

 

[lucca brassi]

Simplest and more efficient way is to make lightpipe (https://si.farnell.com/c/optoelectronics-displays/light-pipes ) through lid

- to drill a hole , for window you want , cut threads in lid .
- cut polycarbonate screw with threads on wanted length .
- apply sealent/adhesive ( not really glue - should be elastic with positive displacement ) on threads like Sikaflex 291 , 291i
- screw in lid acrylic screw

attach wanted LED inside lid /housing

-----------------------------------------------------------
second option is to mold window in acryl plastic resin ( also with use of threads on lid for anchoring ) I use Stuers Epofix epoxy resin with a bit more resin because some shrinking )