How to remove bad smell in Al tank?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Valery

Contributor
Messages
159
Reaction score
15
Location
Lebanon
# of dives
2500 - 4999
Hi all, my Al stage tank slept near a radiator and now it has a bad smell. I took it to the shop and they took the valve off and washed it from the inside. But the smell is still here so I took it back and they washed it again and put the valve in the ultrasonic.
It still have a bad smell, how to properly clean it?
 
Something smells fishy!
 
Can't you be serious and tell me how to remove this fishy smell disease
 
Try a solution of 1 cup distilled white vinegar, 1/4 cup simple green, and 2 cups distilled water. Put the valve back on and shake n roll the cylinder. Remove valve, dump the contents. Pour in rest of the bottle of distilled water to wrinse, then use compressed air from a clean cylinder to blow the inside of the wet cylinder out until dry.
 
Valéry;5967140:
Can't you be serious and tell me how to remove this fishy smell disease

douche? :D
 
Valery,
Your main concern should be the heat expousure from the Radiator. When Aluminum Alloys are exposed to extreme heat the properties of the Alloy changes (for the worse).

If your tank was exposed to:

up to 140C for 24 hours
or 140-160C for 90 Minutes
or 160 to 180 C for 30 minutes

you should get your tank tested.

For the smell Divedoggie gave you a good solution, or you can use some variation of it. I use a homemade brush to clean the inside of tanks with similar solutions... I hope this helps :)
Cheers,
Roger
 
Valery,
Your main concern should be the heat expousure from the Radiator. When Aluminum Alloys are exposed to extreme heat the properties of the Alloy changes (for the worse).

If your tank was exposed to:

up to 140C for 24 hours
or 140-160C for 90 Minutes
or 160 to 180 C for 30 minutes

you should get your tank tested.

For the smell Divedoggie gave you a good solution, or you can use some variation of it. I use a homemade brush to clean the inside of tanks with similar solutions... I hope this helps :)
Cheers,
Roger

Thanks for the info but, temperature was closer to 40 deg C maybe 50C. I'll check this sunday if the smell is gone other wise I'll have it open and clean it myself.

But what's "simple green"?
 
Hook the tank up to a vacuum pump and let it run for about 30 minutes that should get any smell out of it.
 
https://www.shearwater.com/products/swift/

Back
Top Bottom