Mandy3206
Contributor
By the way, which side is the top of the pocket in your picture, the right or the left?
How are weight pockets attached to the BP harness?
- Thread starter SouthEastFloridaDiver
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OP
SouthEastFloridaDiver
Guest
The right side is the top.
Thanks again for your suggestions.
Thanks again for your suggestions.
Mandy3206
Contributor
SouthEastFloridaDiver:
Humm, if the right side is the top, it doesn't leave much room for modifications.
I suggest you go the retainer route and try to install them in the waist strap of your BP one side, and on the other side try on the lower part of the shoulder strap of your harness and see which side is more confortable and easier to use, then reset the less comfortable side accordingly.
There shouldn't be any movement after you install the retainer.
Also I can see some advantage since the pocket will sit lower than mine if you go the waist strap route and this should provide easier acces to them.
Good luck and please let us know how it comes out, a friend of mine is looking foward to buy them and would like to know how yours works and feels.
Similar threads
